During pre-emergency protection or spraying without track lines, foam marking ensures the continual alignment of single spraying runs without unnecessary overlapping or bypassing (leaving behind unsprayed patches).
Compact device Center Line 220 is proposed in order to maximise its use in the inducement GPS using light bar for any activities in the field. Throughout the system for compact instruction an internal GPS WAAS/EGNOS receiver. Precision is +/- 25 cm.
CenterLine 230BP combines the effective navigation GPS with of automatic control sections. Navigation modes include modes AB for driving in a straight line or curved track and rotate mode on headlands. To the device you can pick up slope correction and auto-pilot. Precision is +/-25 cm.
A new generation of input levels GPS navigation for manual management of agricultural machinery. Fully colour graphical screen, USB communication, large memory, intuitive service. Precision is +/- 25 cm.
The first GPS navigation bar in the world that combine LEDs, colour wide format screen and dual L1/L2 GPS receiver. The accuracy between two journeys is +/-25 cm.
Top in technological developments precision control sprayers. System Trimble AgGPS EZ-Boom 2010TM automatically switch off, and switch on the particular sections of boom spraying system in places cross each trail in headland or in a neighbouring journey. The results of this are immediate savings of sprays and reduction of impact on the environment. Economic return of investment is several months. EZ boom 2010 could be mounted on different sprayers or spreaders of fertilisers.
An affordable, accessible system guided GPS control for EZ-Guide Plus, EZ-Guide 250 and EZ-Guide 500. Management system EZ-Steer is ideal for the preparation of land distribution, spraying, combine harvest. For sowing densely sown cereals use EZ-Steer with EZ-Guide 252 and HP difference corrections Omnistar. To achieve the centimetre accuracy, upgrade system EZ-Steer on the Trimble AgGPS Autopilot.
Light laminated mudguards ensure sufficient protection of the sprayer’s control elements against dirt.
The gearbox allows placing the pump inside the frame and improves the sprayer’s throughput through the treated plants.
This type of filling is beneficial when the sprayer’s tank is being filled from a cistern or another source that is delivering water itself, which significantly speeds up the tank filling. As a suitable direct filling accessory, a flow meter independent of the electricity source can be used to measure the quantity of the liquid filled accurately.
A spray gun allows the treatment of less accessible spots (around poles and other obstacles when the arms must be closed, in field corners, or other inaccessible locations). Moreover, it can be used for washing the sprayer immediately in the field, which significantly improves the ecology.
Allows you to keep the same height between nozzles and protected space in the field with slope. Service on a computer controls pair of pistons that lift the booms either simultaneously or separately.
Is used to control impacts between tractor and sprayer and reduces oscillation of the booms. The shaft is composed from one or two flexible segments. It can be used for hard frame or even in combination with device to monitor trail of tractor.
Flexible chain, composed with several tens of hard plastic segments, protects system cables and tubes leading to arms.
This device is used to ensure the same trail of tractor and sprayer systems. You do this in two hydraulic cylinder and sensors assembled between the main frame and towing shaft of sprayer. The device works automatically or manually controlled.
Hydraulically separate end booms control from tractor cab not only easier handling booms, but mainly change the spraying width. The most commonly used variant is to change the length from 24 metres to 18 m.